HONGYANG GROUP New Zealand Technical Center

Fax: +86 (577)88097280

HONGYANG Group logo

HONGYANG GROUP New Zealand Technical Center , Discuss Technical Problem , Suply After Service Online of Fuel Dispenser, Please Regist Firstly

U104-A 3-phase Connection

U104-A

U104-A 3-phase Connection

This type of meter is used to fuel dispensers for measurement of pressurized oil.

Materials:

Body: Aluminum (Spray-Painted)

Package:

Net Weight:

1.7kg/case of 1

Gross Weight: 1.9kg/case of 1

Dimension: 36x15x15cm/case of 1

products links

links

technical archives

    ystem. The valve core of overflow valve moves outward so that all pressured oil flood past the outlet of overflow valve and flow into suction chamber, realizing oil circulation in pump. The hydraulic system pressure is adjusted through increasing or reducing spring pressure. The most fragile section fuel dispenser in hydraulic system will be damaged as the pressure reaching a certain value without a overflow valve to control pressure. The spring pressure will be increased through to add the thickness of pre-pressure ring (20a). The pressure to open overflow valve and the delivery fuel dispenser volume of fuel dispenser are also increased. Vice versa, as the thickness is reduced. working principle of inner-cycloidal gear pump Inner-cycloidal gear pump consists of a pair of inner and outer gear joggled interactively. Inner gear is driver, called as inner rotor; outer gear is driven called as outer rotor. The figure of inner rotor is round arc curve, but the joint section of inner rotor figure and outer rotor curve is exterior cycloidal. Outer rotor exceeds one tooth than inner rotor. Sever sealed working cubage are formed between teeth of inner and outer rotor. Inner rotor brings outer rotor rotation anticlockwise. At that time the cubage gradually increase, formed in suction chamber by the tooth top of inner rotor and gear vale of outer rotor. As pressured oil suck into discharge chamber the cubage formed by inner and outer gear is reducing, impelling oil out of pump. Continual suction and discharge result from the unceasing rotation of out gear driven by inner gear. 1-Vapor separator frame 2-Filter bracket 3-Filter 4-Filter bracket 5\6-O-ring 7-Gear group 8-Axis 9-Key 10-Cover 11-Oil seal 11a-Bolt 12-Screw 13-Elastic washer 14-Thread pipe 15-Joiter 16-Inlet filter 17-Stainer cover 18-Seal ring 19-Voverflow valve cover 20-Spring 20a-Preloading ring 21-Voverflow valve 22-Overflow valve 23-Filter with valve 23a-Spring 24-Exhaust pipe jointer 25-Screw 26-Outlet pipe 27-O-ring 28-Pump body Diagram 2-9: One kind of inner cycloida fuel dispenser

technical specification

    application: ATM application   synchronisation   fuel dispenser Application   fuel dispenser application   reference + no. of parameter   versions present on the ATM   93 reply of context status: server   One exchange per application   Application channel   application software reference + no. of   current parameter versions   Parameterisa   1 parameter request for an   fuel dispenser

we are committed to create the best workplace, encourage our staffs to put their own personalities into their jobs, and provide them a stage to show themselves.

    €œThe Overworked Americanâ€? became a best- seller by telling people something that they thought they already knew. In fact, most of the official numbers have shown that American toil has not changed that much over the past few decades. Americans may put in longer hours at the office than other co fuel dispenser untries, but that is because average hours in the workplace in other rich countries have dropped sharply. In America, official studies tend to show women working more and men less, but the average working week has been fairly constant. How then have Messrs Aguiar and fuel dispenser Hurst uncovered a more relaxed America, where leisure has actually increased? It is partly to do with the definition of work, and partly to do with the data they base their research upon. Most American labour studies rely on well-known official surveys, such as those collected by the Bureau of Labour Statistics (BLS) and the Census Bureau, that concentrate on paid work. These are good at gleaning trends in factories and offices, but they give only a murky impression of how Americans use the rest of their time. Messrs Aguiar and Hurst think that the hours spent at your employer s are too narrow a definition of work. Americans also spend lots of time shopping, cooking, running errands and keeping house. These chores are among the main reasons why people say they are so overstretched (especially working women with children). However, Messrs Aguiar and Hurst show that Americans actually spend much less time doing them than they did 40 years ago. There has been a revolution in the household economy. Appliances, home delivery, the internet, 24-hour shopping, and more varied and affordable domestic services have increased flexibility and freed up people s time. So women are devoting more hours to paying jobs, but have cut their housework and other burdensome tasks by twice as much. Men have picked up some of the slack at home; but thanks to technology and other advances, there is plenty of free time left over for them as well, si fuel dispenser