P-GA FUEL DISPENSER

P-GA FUEL DISPENSER

Pump Type: Optional

Inlet Pressure :>=54kPa.

Flow rate (L/min.) :55±5

Suction Distance (m) :6(verticalmente) / 50(orizzontalmente)

FlowMeter Type : Optional

Accuracy :±0.2%

Motor Voltage(V) :110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle :Auto Shut-off Nozzle

Environmental Condition : -40~~+55degree

Control Type: Solenold Vale Control Type

Preset :Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price :0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Optional Display :Type LCD and Bright Backlight

Digit of Volume : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price :0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Totalizer: 1~~9,999,999

Hose :4.5m

Weight : 280kg

Dimension(L×W×H): 1060*550*1620(mm)

Dimension(L×W×H)Of Qty of Container : 40ft: 44 20ft: 22

causing noise and abnormal vibration is many, either because of fuel dispenser�or exterior elements (pipe trouble). Therefore, it is first to exclude exterior reason of fuel dispenser, then interior one when overcome the above situation. After that, examine strainer and clean dirty. Next parts being checked is overflow valve. Tight spring will stick valve core and generate large noise and vibration. In addition, don’t pursue large flow rate through adjusting spring extensively, since that will shorten the service life of fuel dispenser due to large system pressure. If noise is still large after the above maintenance, pump should be disassembled so as to examine vane and spring whether broken. If these parts are broken the outlet flow fluctuation of pump would be enhanced, as well as noise and vibration. The solution method is to change a new vane and spring. Leakage Leakage is divided as two categories, namely, inner leakage and outer leakage. Under the hig fuel dispenser h oil pressure in hydraulic system oil is leak from fuel dispenser high pressure area to low area, which is called inner leakage. The abrasion of vane, rotor and frame result in extensive inner leakage so as to reduce delivery volume of fuel dispenser. The outer leakage is the one oil leak from inner hydraulic system into outer, which increase unsafe environmental elements except from affecting the normal working performance of pump. To change a new oil seal when find a leakage coming from the root of pump axis. Be sure that don’t make a mistake in installing oil seal. Diagram 2-7 show the correct position ----- the labium of oil seal should face to inner chamber. In addition, tight V wheel also hurts the surface of oil seal next to pump axis so that its capacity is invalid. Diagram 2-7 The most leaking sections are the connecting face---- between pump cover and pump frame, between pump frame and vapor separator, place of cap nut of ov fuel dispenser erflow valve. All of reasons are damaged seal loop or seal gasket, thus change new sealed components as soon as quickly.

90　　3.7 Fuelling Point Data　　This data allows the CD to configure and control a FP in the dispenser.　　The access to the fuelling point data is done by the database address FP_ID (fuelling point　　identification). The FP_ID = 20H is used to ask for all fuelling points.　　Please note that to allow dispensers to operate in stand alone mode the dispenser must have　　default settings for some of the Data_Ids contained in this database. I.e. the dispenser must　　configure these Data_Ids itself after a master resetcold start.　　 FUELLING POINT DATABASE　　 DB_Ad = FP_ID (21H-24H)　　 Data Field Type ReadWrite MO　　 Data Element Name　　 Description　　 _Id (Value) in State　　 CONFIGURATION　　 fuel dispenser FP_Name　　 1 fuel dispenser Asc8 R(1-9) O　　 (01H) W(1-2)　　 Allows to associate a name or number to the Fuelling　　 Point.　　 PCD Comment:　　 As this is an optional data field the PCD can NAK any　　 write requests to this Data_Id with a Data_ACK code of 4　　 (Data does not exist in this device) or reply to any read　　 request with an answer message with the respective　　 Data_Id s length set to 0.　　 Nb_Tran_Buffer_Not_Paid　　 2 Bin8 R(1-9) M　　 (02H) (1-15) W(1-2)　　 fuel dispenser Specifies the number of non paid transactions (not cleared　?

Judged by the first few days of 2006, those forecasts may prove too sanguine. The dollar suffered its biggest two- day drop against the euro in two years, and hit a two-month low of $1.21 against the European currency on January 4th. One reason is that investors are becoming jittery about how soon the interest-rate gap might stop growing. The dollar swooned after the release this week of the minutes of the Fed s December meeting, which suggested that short-term interest rates might not need to go much higher. An interest-rate gap that was merely stable ought to imply a weaker dollar. According to economic theory, it is the widening of interest-rate differentials that temporarily strengthens the exchange rate. Over time, an international difference in interest rates is offset by a drop in the currency with the higher interest rate. Financial markets may also have become too obsessed with the influence of interest rates on currencies. Historicall fuel dispenser y interest-rate differentials have been little more fuel dispenser use than anything else at predicting short-term movements in exchange rates. And there are plenty of other reasons to worry about the dollar. One clear, albeit modest, source of support for the currency in 2005 was the one-off repatriation of American firms foreign profits thanks to a one-year tax break. That is now over. Oil exporters may prove more fickle dollar buyers than many expect. In 2005, as oil prices shot up, exporting countries saw their external surpluses soar. A good slice of these petrosurpluses found their way into dollar- denominated assets. That led some analysts to conclude that oil exporters were a safe and lasting source of dollar support. An alternative view is that the exporters, like others, were attracted by rising American interest rates. A recent study by the Bank for International Settlements, for instance, suggested that the currency fuel dispenser composition of OPEC members deposits has become more sensitive to interest-rate differentials. China is yet another cause o