HONGYANG GROUP New Zealand Technical Center

Fax: +86 (577)88097280

HONGYANG Group logo

HONGYANG GROUP New Zealand Technical Center , Discuss Technical Problem , Suply After Service Online of Fuel Dispenser, Please Regist Firstly

D-GAQ FUEL DISPENSER

D-GAQ

D-GAQ FUEL DISPENSER

FlowMeter Type: Optional

Accuracy : ±0.2%

Pressure Loss (kg/cm) :Under 0.25

Motor Voltage(V) :110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle: Auto Shut-off Nozzle

Environmental Condition: -40~~+55degree

Control Type : Solenold Vale Control Type

Preset : Function Provided(Small LCDIndicator)

Display(Counter): Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price : 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Optional Display :Type LCD and Bright Backlight

Digit of Volume : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price: 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Totalizer: 1~~9,999,999

Hose:4.5m

Weight :280kg.

Dimension(L×W×H) :900*620*2180(mm)

Dimension(L×W×H)Of Qty of Container: 40ft: 45 20ft: 22

products links

links

technical archives

    pistons in same axis line are connected through connecting rod. A column spring is set between each piston and connecting rod, piston and connecting rod move along axis direction. An O ring is installed between connecting rod and piston to prevent leakage. A small axis is inserted into the holes of upper and lower connecting rods. A circle nylon wheel is set between the upper groove of upper connecting rod and two pistons. The small axis of nylon wheel is inserted into the hole of crankshaft. Piston 16 and piston 26 mounted adjusting piston. Four pistons installed at the end of frame respectively. The journey of adjusting piston is adjusted by the adjusting bolt installed at the end cover. 1-Outlet elbow 2-End cover 3-Piston 4-Frame 5-Connecting sheet 6-Low conn fuel dispenser ecting bar 7-Upper connecting rod 8-Cylinder bushing 9 fuel dispenser -Adjusting bolt 10-Cap nut 11-Regulalting piston 12-Driving elbow 13-Brass bushing 14-O-ring 15-Rotation output axis 16-Nylon wheel Diagram 2-17: Structural chart of metal piston measurement transducer Working principle Pistons shuttle under the oil pressure after clean and no-air oil flow into measurement transducer via vapor separator. The two pistons16 and 23 illustrated in Diagram 2-16 impel nylon wheel round one after another, the driving elbow is rotated by the axis of nylon wheel and export the number of rotation. Meanwhile, the oil calculated flow out of outlet through measurement transducer. The rotation is corresponding to the oil volume. The oil volume passed over measurement transducer is a stable constant. A complete working circulation of four pistons under oil pressure is corresponded to a unit circle of export axis. Diagram 2-18 shows the four working status during a whole working circulation. Diagram 2-18 is a simplified working principle drawing of measurement transducer. In order to facilitate explanation label the cylinders and pistons as 1, 2, 3 and 4, the position of most far away the center of piston called the furthest point, nearest position called the nearest point fuel dispenser

technical specification

    €€ã€€ CHSATT_Tip   To interrogate the total number of transactions and the total tip amount.  COMMANDS   80 Cmd R(6) M   CHSATT_Clear   Forces the ATP task to clear the reconciliation data. Note all totals and sub-   totals (per card type) will be cleared at the same time.  chs_100 STANDARD FORECOURT PROTOCOLJ. Carrier April 1998 - FINAL DRAFT 1.00   CARD HANDLING SERVER APPLICATION   Page 52  3.8.3 ATTENDED TRANSACTION RECOVERY  If a read command with Recover_ID = 00H is supplied then the CHS will suppl fuel dispenser y the requested Data_IDs for all recovered  transact fuel dispenser ions of the device.   CARD HANDLING SERVER ATTENDED TRANSACTION RECOVERY DATA BASE   DB_Ad = CHSAT_ENTRY (10H) + RECOVER_ENTRY (02H) + DEVICE_ID (01H - FFH) + RECOVER_ID (00H 01H-FFH)  Data_Id Field Type RW in State MO   Data Element Name   Description CHS_State   10 Bit16 R(4-6) M   CHSATR_Cot   To interrogate the class of transaction.   Bit16   Bit 1 on Purchase   Bit 2 on Refund   Bit 3 on Cash Advance   Bit 4 on CancellationReversals   Bit 5 on Pre-Payment   Bit 6 to 11 reserved for IFSF use   Bit 12 on Loyalty   Bit 13 to 16 reserved for Manufacturer and Oil Company specific use  TRANSACTION DATA   20 fuel dispenser

we are committed to create the best workplace, encourage our staffs to put their own personalities into their jobs, and provide them a stage to show themselves.

    se doing just that for already nuclear-armed India? Not just old thinking You have to deal with the world as it is, comes the reply. India needs to import nuclear fuel and technology, hitherto denied it by a combination of the NPT, the informal rules of the Nuclear Suppliers Group (NSG) and by American law, to support its fast-growing energy needs. And India is not Iran or North Korea. They signed the NPT and cheated. Like Pakistan and Israel, India never joined the treaty and its weapons-making breaks no laws. India is also a responsible democracy; it does not support terrorist groups or threaten to wipe neighbours off the map, as Iran did recently with Israel. Meanwhile, in return for America s bending the rules of nuclear trade, India will put more fuel dispenser civilian nuclear reactors under international safegua fuel dispenser rds, and stiffen its anti-proliferation resolve. Leave aside whether nuclear power best serves Indians needs—that is India s choice, made knowing the anti- nuclear rules it was up against. And while India s nukes broke no laws, in practice it got its start in the weapons business, rather as North Korea and Iran did, by misusing technologies and materials provided for civilian purposes. Mr Bush is nonetheless right that no one expects India to give up its weapons now. But it is one thing to have as broad and close a friendship with a nuclear India as the anti-nuclear rules allow. That is already in both countries interests. It is quite another to knock aside the rules for India s sake. To be sure, Mr Bush is not proposing that other nuclear dabblers be given a welcome if they are persistent enough to succeed� though that will be the message Iran prefers to hear this week. Rather, he wants democratic, friendly, law-abiding India to be treated as an exception by Congress, which must first amend America s own laws if the deal is to go through, and by others in the NSG. The problem here is that India could instead prove the exception that fatally weakens the rules. The devil is bot fuel dispenser